Javascript Menu by Deluxe-Menu.com

800-543-3516   |   770-426-5191   |   770-426-5091 (fax)   |   Info@FedTechInc.com

Federal Diamond Flooring
 
Products - Urecon Urethane
 

Description of Urecon TG

  • Heavy duty, trowel applied urethane modified cement topping.

  • High impact resistance, excellent thermal shock, chemical resistant - ideal for manufacturing areas.

  • Unique “breathing” system makes it a viable solution for many moisture problems.

  • High impact resistance, excellent thermal shock, chemical resistant - ideal for manufacturing areas
    Applications for Urecon TG
    • Typically used in heavy traffic and production areas, such as manufacturing plants and loading, processing and preparation areas.
    • For indoors and outdoors and in areas where freeze/thaw is a factor.
    • Textured surface reduces slipping under most wet conditions.
    • Excellent for rehabbing old floors—provides a much stronger, longer lasting and attractive surface.
    • Key choice for wet areas such as dairies, food processing plants, and industrial kitchens.
    • Can be installed with an integral cove base for areas requiring seamless wall to floor coatings.
    • Will not support growth of fungus or bacteria.
    Typically used in heavy traffic and production areas, such as manufacturing plants and loading,
    Composition of Urecon TG
    • Urecon TG combines a urethane binder with Portland cement and graded aggregates.
    Technical Data:  System Performance Properties
    Flammability ASTM D-635 Non-Burning
    Fungus and Bacteria Growth MIL-F-52505 $4.4.2.11 Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests.
    Hardness ASTM D-2240 80-85 Shore D
    Bond Strength to Concrete ACI COMM#403, Bulletin 59-43 300 psi (100% concrete failure)
    Flexural Strength ASTM C-580 2,000 psi
    Coefficient of Friction ASTM D-2047 0.8
    Water Absorption ASTM D-570 0.10%
    Thermal Shock Resistance ASTM C-884 Passes
    Abrasion Resistance ASTM C-501 Depends on Finish
    Impact Resistance MIL-D-3134F $4.7.3 16 ft./lbs.—0.003 inches Indentation
    Compressive Strength ASTM C-579.7 days 7,500 psi
    Tensile Strength ASTM C-307 800 psi
    Density   130 ft/3rd power
    Thermal Coefficient of Expansion ASTM C-531 1.1 x 10/-5 power
    Cure Time   8-10 hours, ready next day for full service
    Click here for the Material Safety Data Sheet in PDF format.

    Copyright © 2016 Federal Diamond Flooring, Inc. All Rights Reserved.
    2527 Lantrac Court, Decatur GA  30035